Frequently Asked Questions
Homeowners and End Users
Product
Please explain the basic terminology used with louvre windows
Breezway was voted the winner of the most trusted 'Windows and Glazing' brand by Architecture and Design in 2015. There are a few terms that are unique to louvre windows and are helpful to know.

How wide can my louvre windows be? Are there standard sizes?
Typically people are asking how wide a louvre bay can be i.e. the length of the blades. An indicative answer is 600mm to 900mm. When replacing windows or installing new windows, a rule of thumb is the higher the wind and water performance required, the shorter the blade should be. In very high wind zones the bay widths may be a maximum of 600mm or in other geographic areas with lower wind loads they may extend up to 900mm. The window frame can then be designed with multiple bays to achieve the desired frame width. Your window manufacturer will advise you based on your specific circumstances.
There are no standard widths. However, there are standard heights and it is beneficial to stay within these standard heights. The actual standard height will vary depending on your chosen louvre size and framing system. If you use a standard height all louvre blades will operate. If you have an off standard height a small piece of fixed louvre blade will be placed at the head of the window to make up the difference between standard heights. It is worth discussing with your window manufacturer and builder to ensure you have standard height louvre windows installed.
Can blinds be installed with my Breezway Louvres?
Yes, blinds can be installed in conjunction with your louvre windows to help darken rooms if required. Please take into consideration when ordering your louvres that the top blade can be fixed to assist with the installation of the blind above the window. 102mm blade heights are also recommended along with low profile handles as the unique shape of the handle provides a functional fit that won't get in the way of the blinds.
Can I customise my Breezway Louvre Windows? Can they match existing aluminium or timber windows and doors?
With careful thought your new or replacement louvres can be much more than just a window. Consideration of control methods, blade selection and frame type can impact in real benefits such as ease of use, shading, privacy, energy efficiency, comfort, creating views, security, screening etc. Have a look at our Design and Products pages to help you decide. Some time spent now will reward you once the windows are installed.
Visit the Product Selection Guide page to see the variety of customising options.
What colours are available? Can they match my other aluminium or timber windows and doors?
Breezway’s powder coating operation has been set up to address the diverse needs of New Zealand building designs. In New Zealand we offer some 48 standard colours, with optional colour matched hardware (note: Powdercoated aluminium and plastic finishes may vary slightly in colour). We can paint some 300 additional colours. Breezway also has certification from Dulux and Akzo Nobel to powder coat their high performance finishes.
For more information visit our Colour Section in the Customising page.
Safety
Are Breezway Louvres safe and secure?
Our adjustable louvre windows have received a lot of investment in Research and Development and today are a substantially different product from “traditional” old style metal jalousie louvre windows. If you would like to upgrade your security features, then you may consider keylocks, security bars or security screens. Our Altair Louvre Stronghold System is also a great way to increase the strength and safety of your louvre window. Read more about our barrier options in the Customising Page.
Where to Buy?
Where can I view or buy Breezway Louvres?
Due to the nature of our high performing louvres and modern New Zealand Standards, our louvre windows are no longer a DIY proposition. Breezway supplies our component systems through a network of resellers who ensure the product is locally available in timber or aluminium frames and built to meet the required Standards. These resellers are qualified window manufacturers, so you also have the benefit of being able to buy other windows and doors from them. You can find the closest fabricator to you by using our Where to View or Buy page.
If I have an issue with my Breezway Louvre Windows who can I call to fix?
- A) For Breezway Louvres installed into Aluminium Frames please call Albie at AP Windows (based in Auckland), 021 838 323 or info@apwindowsdoors.co.nz
- B) For Breezway Louvres installed into Timber Frames please call Nicks Components & Accessories, 09 426 6862 or tony@nicks.net.nz
How long do my louvres take to manufacture?
Every Breezway Louvre is made to order. Orders commence production throughout the day. Each process – cut, paint, assembly, packaging and despatch is scheduled over the lead time that has been allocated to your order. Very large orders or specialised requests may require a longer lead time. You will then need to allow for shipping time and any assembly by your window manufacturer. The window manufacturer will be able to advise you on total lead time.
Cleaning
How do you clean and maintain Breezway Louvre Windows?
Like all aluminium windows, louvres will need regular cleaning. The smooth outer surface of the Altair Louvre clips and the quality polished edges of the glass blades do make cleaning easier. Another big plus for cleaning our louvre windows is that you can clean the inside and the outside surfaces from the inside of the building. This can be a huge plus for upper storey windows.
There is some maintenance required with Breezway aluminium louvres or timber louvres. It is important to have a regular cleaning program for your aluminium or timber windows. You should think of the finish of your windows in a similar way as your car. Both items need regular cleaning to remove environmental contaminants and maintain paint work. This is particularly so in coastal environments. A higher performance finish may also be required in these environments. Timber blades and Powerlouvres will also require some extra care. Please see the Care & Maintenance page.
Architects and Designers
Specification
Do Breezway Louvres comply with the Building Code of New Zealand, NZS 4211-2008 ‘Windows in Buildings”
Yes, your window manufacturer will work with Breezway to make sure your louvres are designed for the specific conditions on your building site. Altair Louvres from Breezway have been fully tested in a NATA (National Association of Testing Authorities) approved laboratory.
Fall Prevention Compliance
The fall to the outside of some windows is more than 2 metres, are Breezway Louvre Windows safe?
Restricted openings
Altair Louvre Windows can be restricted to comply with F4/AS1 2.1.1 or 2.1.2 of the New Zealand Building Code, where a 100mm diameter sphere must not be able to pass through the openable window.
Imposed Loads
Altair Louvre Windows have undergone testing to the design loads set out in Clause 3.6 and Table 3.3 AS/NZS 1170.1 "Structural Design Actions" for imposed loads on barrier infills. In situations where concentrated loads greater than 187N must be withstood Altair Louvres must be specified to include the Stronghold System which mechanically fixes blades into the Altair Stronghold Clips.
Bushfire Compliance
My project is in a bushfire prone area; will this make a difference when specifying Breezway Louvre Windows?
Altair Louvre Windows can be configured to comply to all Bushfire Attack Levels. The requirements for using Altair Louvre Windows in bushfire prone areas are based on our interpretation of AS 3959-2009 “Construction of Buildings in Bushfire Prone Areas”. We recommend that you receive independent advice from both an engineer and your local council authority to determine your level of construction and to ensure that you comply with the correct protection measures for your individual circumstance. For more information, please visit the Bushfire Prone Areas page.
Cyclonic Regions / High Wind Zones
My project is in a cyclonic area / high wind zone; will this make a difference when specifying Breezway Louvre Windows
Breezway Louvres have been deemed suitable for use in very high wind zones. Please refer to Clause 3.6 and Table 3.3. AS/NZS 1170.1 ‘Structural Design Actions’ for imposed loads for more information.
My project is near the beach; will this make a difference when specifying Breezway Louvre Windows
Like all painted aluminium products Altair Louvres can be vulnerable to harsh coastal environments. The componentry in our louvres is aluminium, stainless steel and industrial grade plastics and will stand up well to these conditions. The powder coat finish however will need special consideration in these environments. If you are in a coastal environment a high performance powder coat or an anodized finish to our standard 25um is required.
Energy Ratings
Will my Breezway Louvres comply with Clause H1?
The NZBC Clause H1 offers a variety of compliance options to which Altair Louvre Windows can meet the minimum energy requirements. For example:
Using the Schedule Method – Altair Louvre Windows can be used with the double glazed IGLU System in a compatible thermally improved aluminium or timber frame. The IGLU System in timber framing will comply for all climate zones and all building types (Average R-Value = 0.48. Large size R-Value = 0.54). The IGLU System in the APL Metro Series ThermalHeart framing will not comply with the scheduling method for housing and buildings <300m², however it will comply for non-housing buildings >300m² for climate zones 1-4 at large sizes (Average R-Value = 0.34. Large size R-Value = 0.39).
Using the Calculation or Modelling Method – Any Altair Louvre Window (single or double glazed) can be used provided other building elements compensate.
Note: The R value measures thermal resistance through a material.
Will my Breezway Louvres be suited to all climate zones?
There are a variety of good Altair Louvre Window design principles that can achieve a comfortable indoor climate and save energy used for heating and cooling across all six (6) New Zealand climate zones. Consider installing a number of clear windows in the northern orientation of the home with high window system R-values (this can be achieved through framing, low e glazing or the double glazed IGLU System). By incorporating Altair Louvre Windows next to fixed lite panels, a beautiful view can be framed while still gaining natural ventilation to improve the indoor air quality and reduce the build-up of mould or condensation.
Education
My project is for an education facility, how are Breezway Louvres best used in this application?
Breezway Louvre Windows are ideal for classrooms, libraries, halls and learning spaces where natural ventilation and occupant comfort are priorities. Their wide opening area helps maximise airflow, reducing reliance on mechanical cooling while creating healthier indoor environments. For best results, they should be positioned to promote cross ventilation and capture prevailing breezes across occupied spaces. See more on the Designing for Education page.
Automation
I am considering automated Breezway Powerlouvre™ Windows for thermal chimney ventilation, what do I need to specify?
For thermal chimney ventilation, automated Breezway Powerlouvre™ Windows can be installed up high in out-of-reach locations to allow warm air to escape naturally. The Apptivate® Advance Control Unit allows the Powerlouvre™ System to be controlled either by wall plate or a smart device to operate the louvres based on temperature or timer settings. When specifying the system, consider the short, wide window sizes with either fixed glazing combinations, power supply and the integration with building management systems. Breezway can provide design guidance to help ensure the system achieves the desired passive cooling and ventilation outcomes. See more on the Powerlouvre™ System page.
Innovation
Has Breezway won any design awards or been included in award winning projects?
Breezway has a long history of innovation, with several products recognised by leading industry and design organisations. The Altair® Powerlouvre™ System has received Australian Window Association (now AGWA) awards for innovation in automated window technology, while the Apptivate® Advance Control Unit has further enhanced automated natural ventilation control capabilities. More recently, the Altair® IGLU® Double Glazed Louvre System received both the 2023 Australian Good Design Award and the AGWA Most Innovative Window System Award for combining the benefits of double glazing with renowned natural ventilation performance.
Breezway Louvres have also been specified in numerous award-winning residential, education, healthcare and commercial projects across Australia and internationally. Architects often choose Breezway systems for their ability to enhance natural ventilation, daylighting and occupant comfort while contributing to distinctive architectural designs. In addition, many projects featuring Breezway Louvre Windows have received recognition through industry and architectural awards for excellence in design, sustainability and innovation. For examples of award-winning projects featuring Breezway Louvre Windows, visit the Breezway Projects Gallery or contact the Breezway specification team for relevant case studies.
Double Glazing
Are Breezway Louvres available with double glazing for thermal and acoustic performance?
Yes. Breezway offers two high-performance glazed louvre solutions designed to improve thermal and acoustic performance while retaining the ventilation benefits that louvre windows. The Breezway IGLU® System is a double-glazed louvre window solution. It features low-e glazing and argon-filled cavity to offer low u values, making it suitable for projects requiring enhanced energy efficiency, thermal insulation, and noise reduction. For projects with particularly demanding acoustic or thermal requirements, Breezway also offers the Dualair® Secondary Glazed Louvre System. This uses two louvre galleries within a single frame to create a secondary glazed assembly.
Builders and Fabricators
Frames
What framing systems can Breezway Louvres be installed into?
Breezway Louvres have been tested to New Zealand Standards. The louvres will be assembled by one of our approved window manufacturers and delivered as a complete window ready for installation by a builder using typical industry practices.
Timber Frames – Available from Nicks Components & Accessories
Aluminium Frames –
- APL – Vantage Window Systems, Altherm Window Systems, First Windows
- Altus – Bradnams, Fisher Windows, Nebulite, NuLook, Rylock, Vistalite
- FMI – Fairview, NEXT
- Omega – Omega Windows
Please note the Breezway Double Glazed IGLU® System is now available in the APL Framing System.
Sizes
How wide can my louvre windows be? Are there standard sizes?
Typically people are asking how wide a louvre bay can be i.e. the length of the blades. An indicative answer is 600mm to 900mm. When replacing windows or installing new windows, a rule of thumb is the higher the wind and water performance required, the shorter the blade should be. In very high wind zones the bay widths may be a maximum of 600mm or in other geographic areas with lower wind loads they may extend up to 900mm. The window frame can then be designed with multiple bays to achieve the desired frame width. Your window manufacturer will advise you based on your specific circumstances.
There are no standard widths. However, there are standard heights and it is beneficial to stay within these standard heights. The actual standard height will vary depending on your chosen louvre size and framing system. If you use a standard height all louvre blades will operate. If you have an off standard height a small piece of fixed louvre blade will be placed at the head of the window to make up the difference between standard heights. It is worth discussing with your window manufacturer and builder to ensure you have standard height louvre windows installed.
Warranty
What is the warranty period for Breezway Louvre Windows?
For the New Zealand market, Breezway® Louvre Windows are covered by the following warranty periods:
- Up to 10 years on finishes
- Up to 7 years on louvre moving parts
- Up to 3 years on electronic components (such as Powerlouvre® system electronics)
This warranty applies to defects arising from faulty workmanship or materials and is subject to the warranty claim procedure and maintenance requirements
